Search for: All records

Potassium hydroxide (KOH) and ammonium sulfide$({\mathrm{N}\mathrm{H}}_4{)}_2{\mathrm{S}}_x$have been used as a surface passivation treatment to improve the electrical and optical performance of AlGaN nanowire ultraviolet (UV) light-emitting diodes (LEDs). Enhancements in photoluminescence at 335 nm (49%), optical output power (65%), and electroluminescence (83%), with respect to the as-grown nanowire LED are recorded for the AlGaN nanowire UV LEDs with surface passivation. These enhancements are attributed to the reduced nonradiative recombination on the nanowire surfaces. This study provides a potential surface passivation approach to produce high-power AlGaN nanowire LEDs operating in the UV spectrum.

In this paper, AlInN nanowire ultraviolet light-emitting diodes (LEDs) with emission at ∼299 nm have been successfully demonstrated. We have further studied the light extraction properties of these nanowire LEDs using photonic crystal structures with square and hexagonal lattices of nanowires. The light extraction efficiency (LEE) of the periodic nanowire LED arrays was found to be significantly increased as compared to random nanowire LEDs. The LEEs reach ∼ 56%, and ∼ 63% for the square and hexagonal photonic crystal-based nanowire structures, respectively. Moreover, highly transverse-magnetic polarized emission was observed with dominant vertical light emission for the AlInN nanowire ultraviolet LEDs.

This paper reports the illustration of electron blocking layer (EBL)-free AlGaN light-emitting diodes (LEDs) operating in the deep-ultraviolet (DUV) wavelength at$\sim <\#comment/>270\mathrm{n}\mathrm{m}$. In this work, we demonstrated that the integration of an optimized thin undoped AlGaN strip layer in the middle of the last quantum barrier (LQB) could generate enough conduction band barrier height for the effectively reduced electron overflow into the$p\text{-}\mathrm{G}\mathrm{a}\mathrm{N}$region. Moreover, the hole injection into the multi-quantum-well active region is significantly increased due to a large hole accumulation at the interface of the AlGaN strip and the LQB. As a result, the internal quantum efficiency and output power of the proposed LED structure has been enhanced tremendously compared to that of the conventional$p\text{-}\mathrm{t}\mathrm{y}\mathrm{p}\mathrm{e}$EBL-based LED structure.

We report on the illustration of the first electron blocking layer (EBL) free AlInN nanowire light-emitting diodes (LEDs) operating in the deep ultraviolet (DUV) wavelength region (sub-250 nm). We have systematically analyzed the results using APSYS software and compared with simulated AlGaN nanowire DUV LEDs. From the simulation results, significant efficiency droop was observed in AlGaN based devices, attributed to the significant electron leakage. However, compared to AlGaN nanowire DUV LEDs at similar emission wavelength, the proposed single quantum well (SQW) AlInN based light-emitters offer higher internal quantum efficiency without droop up to current density of 1500 A/cm²and high output optical power. Moreover, we find that transverse magnetic polarized emission is ∼ 5 orders stronger than transverse electric polarized emission at 238 nm wavelength. Further research shows that the performance of the AlInN DUV nanowire LEDs decreases with multiple QWs in the active region due to the presence of the non-uniform carrier distribution in the active region. This study provides important insights on the design of new type of high performance AlInN nanowire DUV LEDs, by replacing currently used AlGaN semiconductors.